Components
COMPONENTS
ILLUSTRATION
*1 | OUTER MIRROR |
*2 | OUTER MIRROR COVER |
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL OUTER MIRROR COVER
(a) Engage the 6 claws to install the outer mirror cover as shown in the illustration.
![]() |
Install in this Direction |
2. INSTALL OUTER MIRROR
Click here
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE OUTER MIRROR
Click here
2. REMOVE OUTER MIRROR COVER
(a) Pull the outer mirror cover as shown in the illustration to disengage the 3 claws.
![]() |
Place Hand Here |
![]() |
Pull in this Direction |
NOTICE:
As the claws may be damaged, make sure not to apply force in any direction other than shown in the illustration.
HINT:
If it is difficult to disengage the claws, disengage them using a screwdriver with its tip wrapped with protective tape.
(b) Pull the outer mirror cover as shown in the illustration to disengage the 3 claws and remove the outer mirror cover.
![]() |
Place Hand Here |
![]() |
Pull in this Direction |
NOTICE:
As the claws may be damaged, make sure not to apply force in any direction other than shown in the illustration.
HINT:
If it is difficult to disengage the claws, disengage them using a screwdriver with its tip wrapped with protective tape.
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Hybrid Control System: Motor/Generator Shutdown Signal Stuck Off (P321E9F). ECM/PCM Power Relay Sense Circuit Intermittent (P06881F). Hybrid/EV Battery Control System Over Temperature (P30004B)
Motor/Generator Shutdown Signal Stuck Off (P321E9F) DTC SUMMARY MALFUNCTION DESCRIPTION The hybrid vehicle control ECU detects malfunctions which prevent the inverter with converter assembly emergency shutdown circuit (HSDN) from shutting down the hybrid control system. Detection is performed when t ...