On-vehicle Inspection
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT HORN RELAY
|
*a | Component without harness connected (HORN Relay) |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection | Condition |
Specified Condition |
|---|---|---|
|
3 - 5 | Auxiliary battery voltage not applied between terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 | Auxiliary battery voltage applied between terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the HORN relay.
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range (P01102A). Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Mechanical Failure (P001107,P002107). Engine Coolant T
Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range (P01102A) DESCRIPTION Refer to DTC P011011. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P01102A Intake Air Temperature Sensor 1 Bank 1 Signal Stuck in Range Either of the following conditions is m ...
