Toyota Avalon (XX50): Relay

On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT DEF RELAY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
3 - 4	Auxiliary battery voltage applied between terminals 1 and 2	10 kΩ or higher
3 - 4	Auxiliary battery voltage not applied between terminals	Below 1 Ω
3 - 5	Auxiliary battery voltage applied between terminals 1 and 2	Below 1 Ω
3 - 5	Auxiliary battery voltage not applied between terminals	10 kΩ or higher
4 - 5	Always	10 kΩ or higher

If the result is not as specified, replace the DEF relay.

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): Open in Stop Switch Circuit (C1425,P0573)
DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) detects the brake operating conditions through a signal transmitted by the stop light switch assembly. The skid control ECU incorporates a circuit to detect an open circuit. This DTC is output when an open circuit is dete ...